FAQ

If your parcel shows visible damage upon delivery, take photos of the parcel before opening it, then also photograph any damaged products. Next, quickly contact KUTVEK customer service, providing your order number and attaching the photos. These elements will allow our team to assess the situation and offer you the appropriate solution.

Send us photos via your customer account under the Support tab by selecting your order number.

If the decal kit you received does not match the model, design or customisation you ordered, please contact KUTVEK customer service before starting the installation. Provide your order number and attach photos of the kit you received. Our team will check your file to identify the source of the issue and propose the appropriate solution. Important: do not proceed with the installation before contacting our team.

If the carrier's tracking indicates that your parcel has been delivered but you haven't received it, first check with people at your address, your neighbours, or any potential drop-off point. If you still cannot locate your parcel, contact KUTVEK customer service with your order number. Our team can verify the tracking details and assist you in liaising with the carrier.

Contact KUTVEK as soon as possible, providing your order number and the desired modification. If your order has not yet entered production, our team will check whether it is still possible to make changes. However, once a custom kit has been validated and entered production, modifications may no longer be possible. The sooner you contact us, the higher the chances we can intervene before manufacturing begins.

If part of your graphics kit has been damaged due to a fall, friction or other deterioration, it may be possible to reorder only the affected part, without replacing the entire kit. Contact KUTVEK by providing your original order number, your vehicle model and the part to be replaced. A photo of the affected area can also help us accurately identify the required element. Our team will then check the possibilities for reproducing this part.

KUTVEK decal kits are designed and manufactured in France in our workshops. From design preparation to printing, lamination and cutting, all production stages are handled by our teams. This control over production allows us to offer decal kits tailored to a wide range of vehicles: motocross bikes, road motorcycles, 50cc bikes, trail bikes, quads, SSVs and even jet skis.

The production of a KUTVEK graphics kit involves several steps: design creation or adaptation, printing, protective lamination, and precise cutting to match the vehicle's contours. The design is printed onto adhesive vinyl and then protected with a thick, transparent laminate. The entire piece is then accurately cut using a template specific to the vehicle model. For a custom kit, an additional step of design creation and mock-up validation is carried out before production begins.

A KUTVEK graphics kit has a total thickness of approximately 400 microns, including a protective lamination layer of around 300 microns. This thickness ensures the kit is suited to the demands of motorsports: friction, debris impacts, frequent washing, and intensive use. The thickness may vary depending on the product or finish selected.

Lamination is a transparent layer applied over the printed graphics kit. It protects the design from friction, splashes, washing, and wear caused by vehicle use. It also enhances the durability and final appearance of the graphics kit. Depending on the chosen product, different finishes may be available to alter both the look and the overall effect of the decoration.

KUTVEK decal kits use a specially designed adhesive for application on the plastics of motor sports vehicles. The aim is to achieve strong adhesion while allowing precise application on surfaces that may have complex curves and shapes. The quality of adhesion also heavily depends on surface preparation: plastics must be perfectly clean, dry and degreased before application.

The micro-channel technology allows air trapped under the vinyl to escape more easily during application. This makes it easier to position the decal kit and reduces the formation of air bubbles during installation. To achieve the best possible result, it remains essential to work on a clean and properly degreased surface and to follow KUTVEK's installation recommendations.

KUTVEK offers various finishes to alter the appearance of a decal kit. Depending on the models and available products, you can find glossy, matte, glitter, holographic, or fluorescent finishes. Some finishes primarily affect texture or shine, while others create much more visible effects depending on lighting and viewing angle. Available finishes may vary depending on the decal kit and the type of customisation selected.

The glossy finish offers a bright and classic look, while the matte finish reduces reflections for a more understated appearance. The glitter finish adds sparkling effects. The holographic finish creates variations in reflections and colours depending on the light and viewing angle. The fluorescent finish uses particularly vibrant colours to achieve a highly visible effect. The choice mainly depends on the style and visual effect you're aiming for.

Not necessarily. The colour displayed on a screen may slightly differ from the colour obtained after printing. A screen produces its colours through light, whereas a graphics kit is printed with inks on a physical medium. The settings, brightness, and type of screen can also alter the perception of colours. KUTVEK controls its printing parameters to achieve a consistent result, but a perfectly identical match between a screen and a physical print cannot be guaranteed.

Yes, a graphics kit can help protect the surface of plastics against minor superficial marks, light abrasion and some wear caused by regular use. The vinyl and its lamination provide an additional layer between the plastic and the external environment. However, a graphics kit is not impact protection: it cannot prevent plastic from cracking or breaking in the event of a fall or significant impact.

Choose the decal kit that matches your vehicle, select your desired options and finishes, then add it to your cart. For a custom kit, provide the necessary details for its creation: name, number, colours, logos or any other requests based on the available options. Once your cart is confirmed, follow the steps to enter your contact details, choose your delivery method and complete your payment.

Yes, creating a KUTVEK account is mandatory to place an order on our website. Your account allows you to track your orders, monitor their progress, and easily access information related to your purchases. It also simplifies communication with our team, especially for tracking a custom kit or making a customer service request.

The available payment methods are displayed when you check out your basket. Depending on your country and order, the options may vary. Simply select the available payment method that suits you when finalising your purchase. I prefer this wording rather than listing Stripe, PayPal, credit card, etc., as long as we haven't precisely verified what is offered depending on the countries.

The lead time depends on the type of kit ordered, its level of customisation and the production workload at the time of your order. A custom kit requires a design and proofing phase before manufacturing. The production time is separate from the delivery time: dispatch occurs once your kit is manufactured and your order is ready to leave our workshop.

When your order is dispatched, the tracking information allows you to monitor its progress and delivery. You can check the status of your order and, when available, the tracking number associated with your parcel. This enables you to follow the various stages of delivery after your order has been shipped.

Once your parcel has been dispatched, use the tracking number provided with your order to monitor its progress with the carrier. Tracking allows you to follow the various stages of transit and the estimated delivery timeline. If tracking shows your parcel as delivered but you have not received it, please refer to the Customer Service & Order Issues section.

KUTVEK ships its graphics kits to France and many countries worldwide. Shipping options and costs are calculated based on the destination during checkout. Delivery times may vary depending on the country, carrier, and selected shipping service.

The total delivery time includes the time required to prepare or manufacture your order, plus the shipping time. Once the parcel is handed over to the carrier, the transit time depends on your destination and the chosen delivery method. For a custom kit, also remember to account for the time needed to create and approve your design before production.

For some international orders, customs duties, import taxes or other fees may apply depending on the destination country. Their amount and collection method depend on local regulations and the order's destination. For deliveries outside the European Union, we recommend checking the applicable rules in your country before placing an order.

The lifespan of a graphics kit mainly depends on its usage, the quality of its application, and its maintenance. A vehicle used intensively for motocross or off-road riding will be more exposed to friction, mud, debris, and frequent washing compared to a bike primarily used on the road. Applying the kit to perfectly clean and degreased surfaces, combined with proper maintenance, helps preserve the appearance and adhesion of the graphics for longer.

To maintain your graphics kit, clean it regularly with water and a mild cleaning product, then rinse the surface thoroughly. Avoid harsh chemicals, solvents, or strong degreasers that could damage the vinyl, lamination, or adhesive. After washing, check the edges and high-wear areas in particular to quickly detect any potential peeling.

Yes, but with caution. A pressure washer can be used on a vehicle fitted with a graphics kit, provided the jet is not directed too close to the edges of the vinyl. Excessive pressure applied directly to an edge may cause it to lift or peel. Therefore, maintain a reasonable distance and avoid focusing on the outlines and corners of the graphics kit.

The K9 KUTVEK Shine Restorer is specially designed to maintain and restore your deco kit, bringing back its original shine. It can be used on deco kits for motorbikes, quads, SSVs, jet skis, snowmobiles and other vehicles. Regular use of K9 also helps improve the longevity of the deco kit. To discover the product, check out the K9 KUTVEK Shine Restorer product page. And here, I would definitely include the direct product link in the response. It's perfect for our internal linking: FAQ → K9 product, while genuinely answering a maintenance question.

As with most printed materials exposed to the outdoors, prolonged exposure to UV rays, sunlight, and weather conditions can gradually affect the appearance of a graphics kit. Lamination helps protect the print, but whenever possible, parking or storing the vehicle away from constant sun exposure helps preserve its appearance for longer.

If you notice an edge starting to lift, avoid pulling on it and carefully clean the affected area. Depending on the situation, gentle heating may help reposition the vinyl and reactivate its adhesion. The surface must be clean and dry before any intervention. If the lifting is significant or if the part is damaged, contact KUTVEK to determine the most suitable solution.

To remove an old decal kit, gradually heat the vinyl using a hairdryer or a suitable heat source to soften the adhesive. Then, peel off the kit slowly, avoiding any sudden pulling. Once the vinyl is removed, eliminate any remaining adhesive residue with a product suitable for the surface, then thoroughly clean and degrease the plastics before applying a new decal kit.

When the vehicle is not in use for an extended period, if possible, store it in a dry place protected from prolonged exposure to sunlight and harsh weather conditions. Before long-term storage, clean the vehicle thoroughly and allow it to dry properly. These precautions help minimise unnecessary exposure of the graphics kit to UV rays, moisture, and climate variations.

A graphics kit can be replaced when its appearance is heavily worn, when certain parts are damaged or peeling off, or simply when you want to change the style of your vehicle. It is not always necessary to replace the entire kit. If only one part is damaged, contact KUTVEK to check if it's possible to reproduce just the affected element.

Yes, a KUTVEK graphics kit can be fitted by yourself if you take your time and follow the different installation steps carefully. Work in a clean, dry, and temperate environment. Before installation, the plastics must be thoroughly cleaned, dried, and degreased. The application should be done gradually, working from the centre towards the edges and using gentle heat when necessary. To follow all the steps, check out our complete guide: How to Fit a Motocross Graphics Kit? KUTVEK Installation Guide.

Proper preparation of the plastics is essential to ensure the decal kit adheres correctly. Remove the old kit if necessary along with any adhesive residue. Then thoroughly clean the surfaces to eliminate dust, grease, silicone and traces of maintenance products. For a perfectly clean surface before application, KUTVEK recommends using the K7 Cleaner-Degreaser. 👉 Discover the KUTVEK K7 Cleaner-Degreaser The plastics must be perfectly clean, dry and degreased before starting the application.

KUTVEK recommends using K7 Degreaser Cleaner to prepare plastics before applying a graphics kit. It removes impurities and grease residues that may reduce the adhesion of the kit. After degreasing, ensure surfaces are completely clean and dry before starting the installation. Avoid products that leave a greasy, shiny or protective film on the plastics.

Installation should be carried out in a temperate environment. KUTVEK recommends working in a heated and dust-free room, ideally at least 18°C. The vinyl becomes more flexible and adheres better when worked at a suitable temperature. Therefore, avoid applying your kit to cold or damp plastics.

Before completely removing the backing, position the part on the plastic to identify the outlines, mounting holes, angles, and connections with adjacent parts. Then start with a relatively flat and central area, gradually applying the kit from the centre outwards. Do not attempt to stick the entire part at once: working progressively allows for better alignment control and air removal as you go.

Yes. Slightly heating the vinyl during application makes it more flexible, allowing it to better conform to curves, angles and contours. However, one step is particularly important: post-heating after application. Once each piece is correctly positioned, gently heat it and then firmly press along the edges, corners and heavily curved areas. KUTVEK specifically recommends focusing on the last 5 to 10 millimetres of the edges, as these are the areas most prone to peeling.

Apply the kit gradually, starting from a central area and pushing the air outwards with your fingers or a suitable squeegee. For large parts and curved surfaces, work slowly rather than trying to stick the entire surface at once. A gentle heat can also help shape the vinyl on complex areas.

The time required depends on the vehicle, the number and size of the parts, as well as your experience. For a first installation, allow enough time to work without rushing. Cleaning, degreasing, positioning, and especially post-heating the edges are essential steps for a successful application. It's better to take your time and work on each part properly than to try to finish the kit as quickly as possible.

After installation, it is advisable to let the graphics kit settle so that the adhesive can gradually achieve optimal bonding. Where possible, avoid applying your kit immediately before a race, washing, muddy ride, or transport in rainy conditions. Store the vehicle in a clean, dry, and temperate environment after installation. I deliberately avoid stating "24 hrs" or "48 hrs" here: your current KUTVEK guide recommends a settling period but does not specify an exact duration. It's better to remain accurate rather than invent a technical value.

To choose your graphics kit, start by selecting the vehicle type, make, model and year that exactly match your motorcycle, motocross bike, 50cc, quad, SSV or jet ski. The shapes of plastics and fairings can change from one year or version to another. It is therefore important to check this information before placing your order. Once the correct vehicle is identified, you can choose your design, finish and, depending on the product, the various customisation options offered by KUTVEK.

The compatibility indicated on the decal kit's product page corresponds to the vehicle models and years for which the kit was designed. Please carefully check your vehicle's make, model, engine capacity, version and year before placing your order. If you're unsure about compatibility, contact KUTVEK before confirming your order so our team can help you identify the correct kit.

If you cannot find your vehicle on the KUTVEK website, it does not necessarily mean that no solution is available. Contact our team by providing the exact make, model, year, and version of your vehicle. We can check whether we already have the required template or explore options for your specific model.

A standard graphics kit features the design shown on the website in its proposed configuration. A custom graphics kit allows you to modify certain elements based on available options: for example, your name, your number, certain colours, or different graphic elements. For a much more advanced and fully tailored creation, KUTVEK also offers 100% custom design solutions. 👉 Details regarding colours, logos, sponsors, and bespoke creations are available in the Customisation & Design section.

The choice mainly depends on the look you're after. A glossy finish provides a bright and classic appearance, while a matte finish gives a more understated look. Glitter or holographic finishes create visual effects that change with the light. Fluorescent colours, on the other hand, offer a particularly vibrant result. 👉 To find out more about the characteristics of each finish, check out the Product & Manufacturing section.

A graphics kit is designed according to the shapes, surfaces, and specific constraints of the vehicle it is intended for. A motocross bike mainly features specific plastics that are heavily exposed to friction, mud, and frequent washing. A road bike has fairings and surfaces that are very different. It is therefore important to choose a kit specifically designed for your model rather than a generic or universal decoration.

KUTVEK offers decal kits for many models and different generations of motorcycles. Availability however depends on the vehicle and the templates we have in stock. If your older bike doesn't appear on the website, please contact us specifying the make, model and year. Our team will check what options are available for your vehicle.

Yes. KUTVEK develops graphics kits for many categories of motor sports vehicles, including motocross bikes, road motorcycles, trail bikes, 50cc bikes, quads, SSVs and jet-skis. Select the category matching your vehicle on the KUTVEK website, then search for your make and model to discover compatible kits. If your vehicle is not listed, you can contact our team to check the available options.

Depending on the kit you choose, you can customise various elements of your graphics: name, number, colours, logos, sponsors, and certain graphic elements. When placing your order, provide the necessary information for customisation. Our graphic team will then prepare your project, taking into account the selected design and chosen options. If you wish to go much further and create a completely unique design different from those in our catalogue, you can opt for a 100% custom graphics kit.

A custom kit is based on an existing KUTVEK design to which you can make various modifications: name, number, colours, logos, or other suggested elements. A 100% custom kit allows you to go much further: our graphic team creates a design specifically tailored to your project, your vehicle, and your preferences. This solution is particularly suited if you want a truly unique design that differs from the models offered in our catalogue. 👉 To start your project: Create my 100% custom graphics kit

Yes. Depending on the design chosen, it is possible to request modifications to certain colours in your decal kit. Specify your desired colours when placing your order so our design team can incorporate them into your customisation. Please note that the printed colour may slightly differ from what is displayed on screen due to factors such as screen settings and brightness.

Yes. If you're looking for a specific colour, please indicate it as precisely as possible in your customisation request. You can provide a colour reference or visual example to help our design team identify the desired result. However, a perfectly identical match between a colour displayed on screen and its printed result cannot always be guaranteed.

Yes. Depending on the product chosen, you can add your name, your race number or other personal elements to your decal kit. Please provide these details when placing your order so they can be included in your design template. Carefully check the spelling of your name and your number when approving the template before manufacturing.

Yes. It is possible to include your sponsors' logos in your custom graphics kit. For the best possible result, provide high-quality files, ideally in a vector format. You must also ensure you have the necessary permissions to use the trademarks and logos you provide to us.

For a crisp print, prioritise vector files whenever possible, such as AI, EPS, PDF or SVG. A vector file can be resized without quality loss, making it easier to integrate into the graphics kit design. If you only have an image, provide it in the highest resolution available. Avoid screenshots, heavily compressed images or very small files.

Yes. For an order requiring graphic design, a mock-up will be presented to you before the production of your decal kit. This step allows you to check the design, colours, name, number, logos, and all customisation elements. Take the time to carefully review the entire project. The production of your kit will begin once you have approved the mock-up.

You can request up to 9 modifications to your design before final approval. These requests allow you to adjust various elements of the project: colours, logos, name, number, positioning, or other graphic elements. To streamline our design team's work and speed up the creation of your kit, we recommend grouping your requests as much as possible with each revision. Once you're happy with the result, carefully review the entire design before approving it for production.

Contact KUTVEK as soon as possible, providing your order number and the desired modification. If your graphics kit has not yet entered production, our team will check whether it is still possible to make changes to your project. However, once the design has been approved and production has started, modifications may no longer be possible. It is therefore important to carefully review your design before final approval.

KUTVEK decal kits are made to order. Depending on the order, they are printed and crafted specifically for the vehicle, model, year, trim and/or the customer's customisation choices. Custom kits can also include elements specific to the customer, such as a name, number, colours or logos. When a product is made to the customer's specifications or significantly personalised, the legal 14-day right of withdrawal does not apply, in accordance with Article L221-28, 3° of the French Consumer Code. This means that a kit covered by this exception, manufactured in accordance with the order, cannot be returned or exchanged due to a simple change of mind. This rule does not limit your rights if a product is faulty, damaged or does not match the order. In this case, please contact KUTVEK customer service so our team can review your request. Consult Article L221-28 of the French Consumer Code on Légifrance.